EPEVER SOLAR CHARGE CONTROLLER Set up: TRACER AN Sequence CONTROLLE

EPEVER SOLAR CHARGE CONTROLLER Set up: TRACER AN Sequence CONTROLLE

Blog Article

The EPEVER Tracer AN Sequence Photo voltaic Cost Controller is a remarkably efficient solar controller made for off-grid solar programs. Based on multiphase synchronous rectification know-how, it makes sure optimized Electrical power conversion and system stability for an array of photovoltaic (PV) apps.

Critical Capabilities of the EPEVER Tracer AN Sequence Controller
The Tracer AN sequence makes use of EPEVER Photo voltaic Demand Controller technologies for exceptional solar Power harvesting. Crucial functions contain:

Multiphase Synchronous Rectification (MSR) for improved Power conversion.
Innovative MPPT Algorithm with >ninety nine% efficiency.
Dual-Phase Charging for Increased battery everyday living.
Liquid crystal display Exhibit with serious-time details checking.
Many Load Handle Modes which include handbook and timer.
Detailed Digital Protections against overcharging, in excess of-discharging, brief circuits, and reverse polarity.
Action-by-Action Guide to Putting together the EPEVER Tracer AN Sequence Controller
1. Unboxing and Getting ready the Controller
Make sure all components are included: Tracer AN device, temperature sensor, interaction cables, and consumer manual.
Verify the design variety and voltage rankings match your solar panel and battery technical specs.
2. Mounting the Charge Controller
Pick a effectively-ventilated, dry place near the battery bank.
Secure the Tracer AN controller utilizing the delivered mounting brackets.
Retain right clearance for heat dissipation.
3. Wiring the Photo voltaic Charge Controller
Caution: Normally observe suitable security protocols and make sure the technique is powered off prior to connecting factors.

Stage one: Hook up the battery terminals towards the demand controller (favourable to beneficial, destructive to damaging).
Phase 2: Join the photo voltaic panel array for the PV enter terminals.
Stage 3: Join the load terminals if utilizing a immediate load relationship.
Phase four: Double-Test all connections for polarity and tightness.
four. Configuring the Controller Configurations
Electrical power about the controller by connecting the battery very first.
Make use of the LCD Show to navigate the settings menu.
Configure:
Battery Form: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Handle Modes: Guide, timer, gentle Manage.
5. Monitoring and Details Logging
The Tracer AN Sequence supports authentic-time monitoring utilizing the MT50 distant meter.
Info is usually logged via the RS485 communication port using program such as Solar Station Computer system.
Distant checking is feasible with the EPEVER WiFi module.
6. Troubleshooting Common Difficulties
Situation one: No Power Output

Check battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Difficulty two: Over-Voltage Safety

Confirm the photo voltaic array’s voltage ranking.
Alter process parameters if vital.
Issue 3: No Battery Charging

Inspect PV wiring for continuity.
Validate MPPT configurations inside the menu.
Great things about the Tracer AN Collection with MSR Technologies
The multiphase synchronous rectification know-how makes sure:

Larger Effectiveness: Minimized energy losses through conversion.
Increased Reliability: Stable general performance under variable masses.
More time Battery Life: Regular and precise charging profiles.
Conclusion
The EPEVER Solar Cost Controller with multiphase synchronous rectification know-how is definitely an Fantastic choice for optimizing solar energy generation and lengthening battery life. By next the above mentioned set up guidebook, people can ensure most effectiveness and More info technique longevity.